Comparison of microwave and high-pressure processing on bound phenolic composition and antioxidant activities of sorghum hull

The influence of microwave boiling (MB treated 5, 10 and 15 s was abbreviated as MB5, MB10 and MB15, respectively) and high-pressure boiling (HB processed 10, 20 and 30 min was denoted as HB10, HB20 and HB30, respectively) processing on the composition and content of bound phenolic substances of sorghum hull and their antioxidant capacity were evaluated. Nine bound phenolic profiles were identified by HPLC-ESI-MS/MS, including syringic acid, veratric acid, p-hydroxybenzonic acid, caffeic acid, sinapic alcohol, ascorbic acid, prenylnaringenin and luteolin. Compared with traditional hot water processing (HP treated 10, 30 and 50 min was abbreviated as HP10, HP30 and HP50, respectively), the content of free procyanidins and total phenolics of sorghum hull treated with HB increased by 35.92–58.87% and 6.20–18.70%, respectively. Sorghum hull treated with HB20 possessed the highest ABTS (ABTS radical scavenging capacity) and FRAP (ferric ion reducing antioxidant power) among all treatment groups.     

链条炉运行参数对燃烧及NOx排放的影响

通过数值模拟的方法研究了过量空气系数、配风方式、空气预热温度和炉排转速等运行参数对床层燃烧和氮氧化物排放特性的影响。研究结果表明:过量空气系数增大可加快床层整体反应速率,缩短反应区长度,增大床层表面氮氧化物质量浓度;合理推迟配风有利于扩展反应区整体长度,充分利用整个炉排;适当降低炉排转速有利于提高煤着火及前期反应速率,稍缩短总体反应区间;提高空气预热温度有利于煤着火和前期反应速率的提高,且有利于煤的燃尽。     

连续蓄热式生物质气化/燃烧供热系统

生物质能源是一种环境友好的可再生能源,但也存在能量密度低、含水率高、碱金属含量高等缺点,导致其在热利用的过程中存在易结渣、堵灰及腐蚀、热效率不高等问题。本文结合生物质气化、炉内碱金属/硫固定、两级焦油裂解、蓄热式燃烧,以及冷凝热回收等多项先进技术,设计并搭建了连续蓄热式生物质气化/燃烧供热系统。以海洋贝壳类废弃物作为生物质成型燃料的添加剂和生物质焦油裂解过程的催化剂,在实现海洋废弃资源高值化利用的同时,克服了生物质热利用过程中的多项障碍,能够显著提高生物质能热利用效率,同时大幅度降低当前工业及民用供热过程中CO₂、SO_x、NO_x及烟尘的排放,具有良好的经济性与环保性。     

Supramolecular Chemistry in Molten Sulfur: Preorganization Effects Leading to Marked Enhancement of Carbon Nitride Photoelectrochemistry

Here, a new method for enhancing the photoelectrochemical properties of carbon nitride thin films by in situ supramolecular‐driven preorganization of phenyl‐contained monomers in molten sulfur is reported. A detailed analysis of the chemical and photophysical properties suggests that the molten sulfur can texture the growth and induce more effective integration of phenyl groups into the carbon nitride electrodes, resulting in extended light absorption alongside with improved conductivity and better charge transfer. Furthermore, photophysical measurements indicate the formation of sub‐bands in the optical bandgap which is beneficial for exciton splitting. Moreover, the new bands can mediate hole transfer to the electrolyte, thus improving the photooxidation activity. The utilization of high temperature solvent as the polymerization medium opens new opportunities for the significant improvement of carbon nitride films toward an efficient photoactive material for various applications.     

机动车三元催化剂结构性能的研究

当前治理汽车尾气污染的最好方法是采用含有贵金属的三元催化剂同时对NOx、HC、CO进行处理.催化转化器的结构性能直接影响催化效率的高低,准确测定及鉴定催化剂中主要部件的结构性能指标就具有重要意义.该文利用X-射线衍射光谱仪(XRD)、扫描电子显微镜能谱分析技术(SEM-EDS)以及等温液氮吸附-脱附技术对6种使用过的和未使用过的机动车尾气三元催化剂的结构性能进行分析研究.结果表明:可以通过X-射线衍射光谱仪区分各催化剂载体的材质,文中样品经鉴定都为堇青石陶瓷蜂窝载体,不同催化剂的比表面积和孔容存在差异;通过扫描电子显微镜可以观察到催化剂载体表面涂层的微观结构,及一些催化剂载体表面涂层出现的裂纹;通过能谱分析各载体主要元素的大致含量.     

Selective Analysis of Sulfur-Containing Species in a Heavy Crude Oil by Deuterium Labeling Reactions and Ultrahigh Resolution Mass Spectrometry

A heavy crude oil has been treated with deuterated alkylating reagents (CD₃I and C₂D₅I) and directly analyzed without any prior fractionation and chromatographic separation by high-field Orbitrap Fourier Transform Mass Spectrometry (FTMS) and Fourier Transform Ion Cyclotron Resonance Mass Spectrometry (FT-ICR MS) using electrospray ionization (ESI). The reaction of a polycyclic aromatic sulfur heterocycles (PASHs) dibenzothiophene (DBT), in the presence of silver tetrafluoroborate (AgBF₄) with ethyl iodide (C₂H₅I) in anhydrous dichloroethane (DCE) was optimized as a sample reaction to study heavy crude oil mixtures, and the reaction yield was monitored and determined by proton nuclear magnetic resonance spectroscopy (¹H-NMR). The obtained conditions were then applied to a mixture of standard aromatic CH-, N-, O- and S-containing compounds and then a heavy crude oil, and only sulfur-containing compounds were selectively alkylated. The deuterium labeled alkylating reagents, iodomethane-d₃ (CD₃I) and iodoethane-d₅ (C₂D₅I), were employed to the alkylation of heavy crude oil to selectively differentiate the tagged sulfur species from the original crude oil.     

Rectangular Section Control Technology for Silicon Steel Rolling

Rectangular section control technology(RSCT)was introduced to achieve high-precision profile control during silicon steel rolling.The RSCT principle and method were designed,and the whole RSCT control strategy was developed.Specifically,RSCT included roll contour design,rolling technology optimization,and control strategy development,aiming at both hot strip mills(HSMs)and cold strip mills(CSMs).Firstly,through the high-performance variable crown(HVC)work roll optimization design in the upper-stream stands and the limited shifting technology for schedule-free rolling in the downstream stands of HSMs,a hot strip with a stable crown and limited wedge,local spot,and single wave was obtained,which was suitable for cold rolling.Secondly,an approximately rectangular section was obtained by edge varying contact(EVC)work roll contour design,edge-drop setting control,and closed loop control in the upper-stream stands of CSMs.Moreover,complex-mode flatness control was realized by coordinating multiple shape-control methods in the downstream stands of CSMs.In addition,the RSCT approach was applied in several silicon-steel production plants,where an outstanding performance and remarkable economic benefits were observed.     

微反应器中十二烷基苯液相SO_3磺化过程

石油磺酸盐和重烷基苯磺酸盐是三次采油用重要阴离子表面活性剂,其主要成分是烷基苯磺酸盐。本研究以十二烷基苯(DDB)液相SO3磺化为模型反应,研究微反应器内的烷基苯磺酸合成反应过程特性,考察了液体流量、反应温度、磺化剂中SO3含量、反应通道长度、SO3与十二烷基苯物质的量比、微反应器结构、搅拌时间等参数的影响。结果表明,十二烷基苯磺化过程受传质控制,微反应器对反应初始阶段的强化作用明显,在SO3与十二烷基苯物质的量比为1.1时,采用微反应器与釜式反应器串联模式合成十二烷基苯磺酸,收率高达93.7%,为微反应器生产重烷基苯磺酸的路线提供了重要基础。     

电催化氮气还原合成氨催化材料研究进展

氨是纺织、制药、化肥等领域重要的化工原料，也是一种清洁的能源载体，需求量大。目前氨的工业生产主要为Haber-Bosch法，反应条件严苛，能源消耗大且碳排放较高。电催化氮气还原(NRR)合成氨是一种在常温常压下进行的反应，工作电位低，且电能可通过清洁能源提供，是一种很有潜力的合成氨新工艺。但目前电催化NRR材料的产氨速率和法拉第效率低、工作稳定性不够高、溶液中痕量氨的定量检测困难及检测标准不统一等都为其发展带来了巨大挑战。本文首先介绍了电催化NRR的反应机理和常用研究方法，然后重点梳理了2019年以来NRR催化材料的最新研究进展，最后对该领域研究面临的挑战和机遇进行了展望。